The Cooler Master RR-B10-212P-GP Hyper 212 Plus CPU Cooler's design offer fin optimization with a perfect balance between high and low speed operation. Direct contact heat-pipes provide seamless heat dissipation between CPU surface and cooler. Not to mention, it comes with extra fan clips, so you can easily swap and upgrade to dual fans! This versatile all-in-one mounting solution supports Intel Sockets LGA775, 1156, 1366 and AMD Sockets AM2, AM2+, AM3.
Specifications
Fan Type:
CPU Cooler
Socket Type:
LGA 1366, 1156, 775, AMD AM3, AM2+, AM2
Maximum Processors Supported:
Intel Core i7, Core i7 Extreme, Core i5, Core i3, Core 2 Extreme, Core 2 Quad, Core 2 Duo, Pentium, Celeron, AMD Phenom II X4, Phenom II X3, Phenom II X2, Phenom X4, Phenom X3, Athlon II X4, Athlon II X3, Athlon II X2, Athlon X2, Athlon, Sempron
Fan Speed:
600 - 2000 R.P.M. (PWM)
Noise Level:
13 - 32 dBA
Air Flow:
21.2 - 76.8 CFM
Static Pressure:
0.40 - 3.90 mm/H2O
Heatsink Material:
Aluminum
Bearing Type:
Long Life Sleeve
Connector(s):
4-Pin
Fan Dimensions:
120 x 120 x 25 mm
Heatsink Dimensions:
120 x 79.7 x 158.5 mm
Life Hours:
40,000 Hours
Customer Reviews and Rating
Customer Rating:
4.7
Customer Reviews: 9
Have an opinion on this product that you would like to share? If so, please take a few moments to write your rating and review.
Value
4.9
Features
4.6
Quality
4.3
Performance
4.9
Sort By:
Best cooler for the price and performance
Reviewer:
Rick on
Jan 18, 2010 Customer Rating:
5.0
Value
5.0
Features
5.0
Quality
5.0
Performance
5.0
This cooler delivers performance like coolers that cost way more. I got this when moving from my old E7400 to my new E8400 and me E8400 appreciates it so much. I'm at 3.6GHz and not breaking mid-50s in Orthos CPU stress test or mid-60s in Linpack. That's amazing. Recommend that you throw away the paper manual that comes with it and check out CoolerMaster's video on how to install it, available on Youtoob.
good product
Reviewer:
bling on
Jan 07, 2010 Customer Rating:
4.8
Value
5.0
Features
5.0
Quality
5.0
Performance
4.0
I have been using this cooler since October, and it works well. There is nothing wrong with the mounting as in some of the other reviews. Yes, you do have to use a plate under the mobo to mount, but push pins would be pretty cheesey for an upgraded fan. Only problem I have encountered is that it is tall and I cant put the side panel on my case. Oh well, time for a new case!
Exceptional cooler but mounting sucks
Reviewer:
Stinky Joe on
Dec 30, 2009 Customer Rating:
4.3
Value
5.0
Features
3.0
Quality
4.0
Performance
5.0
Cools a quad core i7 860 on a Gigabyte GA-
P55-UD3R board quite well. Idles at 27c and 45c under load using prime 95. This is only 4 degrees less at idle but 21 degrees less under load than the stock cooler. Overclocked temps are around 55c at 3.4 ghz.
The fan is quiet, even at full speed. Probably will not fit small and mid sized cases.
Mounting system sucks bad. Unless you install this when you build a pc, you need to remove the mobo.
Base was square and flat. Gaps between the pipes and base are small but I filled them with paste anyway. One pipe had a small dent where it contacts the processor. The base could have been polished better but this is what you get for this price.
This has been rated in the top 10 for coolers.
Used a silver thermal paste instead of what was supplied.
Good Product
Reviewer:
cwhitmer on
Dec 04, 2009 Customer Rating:
5.0
Value
5.0
Features
5.0
Quality
5.0
Performance
5.0
For the price can't beat it. Keeps cpu and entire MOBO cool. A little big but no problems.
stays cool
Reviewer:
wayne on
Nov 14, 2009 Customer Rating:
4.8
Value
5.0
Features
4.0
Quality
5.0
Performance
5.0
stays very cool even with drastic overclocking. But was a little hard to install
Manufactured by:
Cooler Master Mfg Part No:
RR-B10-212P-G1 UPC No:
884102005077 Box Size:
( Length: 9, Width: 7, Depth: 4 )
Shipping Weight:
2.0000 pound(s)
Limited Warranty:
12 months parts;
12 months labor
Click here for full warranty and support information
Limited Warranty: A full text version of the limited warranty
may be obtained by mailing a self addressed, stamped envelope to the
address below and requesting the warranty for item number:
C283-2054